Cylinder Honing Machine
| TECHNICAL SPECIFICATIONS |
H 260 A |
|
| Max honing diameter * bigger diameter available on request | mm inch |
60 |
| Min. honing diameter | mm inch |
25 |
| Max. honing stroke | mm inch |
508 |
| Min. honing stroke | mm inch |
50 |
| Max. distance table to honing spindle nose | mm inch |
950 |
| Max. distance from spindle centre to cloumn | mm inch |
430 |
| Max. cross movement of honing box | mm inch |
130 |
| Table surface | mm inch |
1450×450 |
| Max. table traverse | mm inch |
1500 |
| Infinitely variable spindle rotation | rpm |
32-315 |
| Infinitely variable reciprocating spindle speed | m/min ft/min |
5-20 |
| Max. spindle torque | Nm ft lbf |
82.5 |
| Maximum hydraulic pressure | bar psi |
120 |
| Motors | ||
| Electric motor for hydraulic | kW hp |
7.5 |
| Coolant pump | kW hp |
0.16 |
| Dimensions | ||
| Height of machine | mm inch |
2530 |
| Total length of machine | mm inch |
2420 |
| Total width of machine | mm inch |
1400 |
| Working space required | mm inch |
3050×1400 |
| Net. weight approx. | kg lbs |
1430 |
| Shipping weight approx. (wooden box) | kg lbs |
1630 |
| Shipping volume | m³ ft³ |
6.20 |
We are engaged in a continuous process of improving our machines. The details associated with any descriptions, specifications and illustrations shown may thus vary without further notice.
Standard Equipment: electrical tropicalized installation, complete hydraulic system, load meter for taper control, bayonet adapters for Delapena honing equipment, setting up blocks 220 mm (8.66″), honing fluid tank, splash guards, set of clamps, bolts and spanners, operating manual and spare parts catalogue.
For H 260 A only: built-in unit for adjustable constant stone pressure, automatic stop of honing cycle with selector.