Cylinder Boring and Honing Machine for Motorcycle TM807A
This machine is mainly used for maintaining the cylinder of motorcycle, etc. Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is
determined, and the cylinder is fixed, maintenance of boring and honing can be carried out. The Cylinders of the motorcycles with diameter 39-72mm and depth within 160mm can all be bored and honed. If the suitable fixture are fitted, other cylinder bodies with corresponding requirements can also be bored and honed.
Main Specification:
| Model | TM807A | |
| Diameter of boring &honing hole | 39-72mm | |
| Max. Boring & honing depth | 160mm | |
| Rotational speed of boring &spindle | 480r/min | |
| Steps of variable speed of boring honing spindle | 1step | |
| Feed of boring spindle | 0.09mm/r | |
| Return and rise mode of boring spindle | Hand operated | |
| Rotational speed of honing spindle | 300r/min | |
| Honing spindle feeding speed | 6.5m/min | |
| Electric motor | Power | 0.75.kw |
| Rotational | 1400r/min | |
| Voltage | 220v or 380v | |
| Frequency | 50HZ | |
| Overall dimensions(L*W*H) mm | 680*480*1160 | |
| Packing(L*W*H) mm | 820*600*1275 | |
| Weight of main machine(approx) | N.W 230kg G.W280kg | |
Standard accessories:
tool box, accessories box, centering device, centering rod, centering push rod,specific micrometer, press ring of cylinder, press base, packing ring of lower cylinder, boring cutter, springs for cutter,Hex, socket wrench, multi-wedge belt, spring (for centering push rod), base for honing cylinder, honing tool, clamp pedestal, press piece,adjust support, screw for pressing.